Working with the notebook
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergency r emovalofda tacarrier
In the even t of a power failure or damage to the drive, you can remove the data carrier manually.
1
2
► Switch your notebook off.
► Push a pen or a piece of wire (such as a
paperclip) firmly into the open ing (1).
The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.
Removing and fitting the dust removal cover
(ventilation slot cover)
The description below a pplies to both vent covers.
In order to ensure optimum cooling of the components in your noteb ook, y ou
should periodically clean the ventilation slot of the heatsink.
This ensures optimum fan performance. You can achieve the best cleaning
results with a small hand-held vacuum cleaner.
If necessary, you can also use a dry brush to release dust from the ventilation slots.
Do not use any cleaning liquids! Ensure that no liquid enters the device.
To avoid overheating of t he device, do not remove the ventilation slot
cover when the device is switched on.
► Prepare fo
r r emoval, see chapter "
Prep aring to remove com ponents", Page 69.
Fujitsu Technology Solutions 37
To Next Page
Loading...
