Working with the notebook
Setting up WLAN access
• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via UMTS
If you have ordered a n integrated UMTS module with your system, you can enjoy the
best reception and maximum energy efficiency, without any disruptive cables or aerials.
The optional UMTS module is ready for use immediately.
If you have not ordered a UMTS module, you can purchase the accessories for UMTS reception
from specialised dealers or from your Fujitsu Techn ology Solutions dealer.
You will find information on establishing the connection with the UMTS network
in the documentation for the hardware used.
Your device can connect with the Internet via UMTS. To do th is, use one of
the following types of connection:
• an integrated UMTS module (depending on yo ur model variant)
• a USB dongle (a USB stick with your mobile phone provider ’s SIM card)
• a UMTS ExpressCard (to be inserted in the E xpressCard slot of your device)
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
► Connect the network cable to the LAN
port of the notebook (1).
► Connect the network cable to your
network co nnection (2).
Your n
etwork administrator can help you to config ure and use the LAN connections.
The n
etwork cable is not included in the delivery scope. This type of
cabl
e can be obtained from a specialist dealer.
48 Fujitsu Technology Solutions
To Next Page
Loading...
