Troubl esho ot ing and tips
The notebook stops working
NotebookEnergys avingmode
Cause Troubleshooting
Notebook is in energy saving mo
de.
► Leave energy saving mode.
An application programme has
caused the
malfunction.
► C lose th e application program or restart
the notebook (by restarting the ope rating
system or switching the device off and back
on again).
The battery is dead.
► C harge the battery.
or
► Insert a charged battery.
or
► Connect the mains ada pt
er to the
notebook.
The printer does n ot print
Printerdoe s notp
rint
Cause Troubleshooting
The printer is not switched on. ► M a ke sure that the printer is switched
on and ready for operation (refer to the
documentation supplied w ith the printer).
The printer is not connected correctly.
► C heck that the data cable connecting
the notebook to the printer is p roperly
connected.
The printer driver is fa ulty or not correctly
installed, or it is the wrong printer driver.
► C heck that the data cable connecting
the notebook to the printer is p roperly
connected.
► C heck whethe
r the correct printer driver is
loaded ( ref
er to the printer documentation).
The radio connection to a network does not work
Theradi
oconnect i ontoane tworkdoes notwork
Cause Troubleshooting
The wireless component is disabled.
► Switch the radio component on (see
"
Switch ing the wirele ss components on and
off", Page 47).
The wireless component is enabled. Despite
this, the wireless connection to a network doe s
not work.
► C heck whether the radio connection is
switched on via the software.
► Furthe
r information on using the radio
compo
nent can be found in the help files.
Fujitsu Technology Solutions 79
To Next Page
Loading...
