Removing and installing components
during servicing
Removing a cover
1
2
► Remove the screw (1).
Keep the screws in a safe place. If you are removing more than one component at
the same time, store the screws for the individual components sepa rate from each
other. If you install the wrong screws, components may b e da maged.
► Lift the cover off the notebook (2).
Removing memory modules
3
2
1
1
► Carefully push th e two mounting
clips o utwards (1).
Memoryexp
ansion
Memorymod
ule
The memory module snaps upwa rds (2).
► Pull the memory module out of its slot
in the direction of the arrow (3).
70 Fujitsu Technology Solutions
To Next Page
Loading...
