Fujitsu CELSIUS H970 - BIOS Supervisor and User Passwords; Connecting External Devices

Security functions
Protecting BIOS Setu p Utility (supervisor and user password)
If you have opened these operating instructions on the screen , we
recommend th at you print them ou t. You cannot call the instructions onto
the screen while you are setting up the passw ord.
BIOSSetupUtility
The supervisor password and the u ser password both pre vent unauthorised use o f the BIOS Setup
Utility. With the aid of the supervisor password you can access all of the functions of the BIOS
Setup Utility , while the user password will only give you access t o some of the functions. You
can only set up a user password if a supervisor password has already been assigned.
Please refer to section "Settings in BIOS Setup Utility", Page 68 for a description
of how to call up and operate the BIOS-Setu p- Utility.
Assigning the supervisor and user passwords
► Start the BIOS Setup
Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.

With Enter new Pass
word: you are asked to enter a password.
► Enter the password and press the Enter key.

Confirm new Passwo
rd requires you to confirm the password.
► Enter the pa ssword again and press the Enter key.

Changes have be
en saved is a c onfirmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.

Ifyoudonotwa
nt to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes an
d press the Enter key.
PasswordSupervisorpasswordUserpassword

The notebook is then rebooted and the new password comes into effect. It will now be necessary
to first enter your supervisor or user password in order to open the BIOS Setup Utility.Please
note that the user password only provides access to a few of th e BIOS settings.
Changing t
he supervisor or user password
You can only change the s upervisor password when you have logged into the
BIOS Setup Ut ility with the supervisor password.
Passwo
rd
Superv
isorpassword
Userpa
ssword
► Call the BIOS S etup Utility andgototheSecurity menu.
► When cha
nging the password, proceed exactly as for password assignment.
46 Fujitsu