Removing and installing components
during servicing
Attaching the cover
1
2
2
2
2
2
2
► Place the cover in the correct mounting position (1).
► Tighten the screws (2).
► Re-f asten the cover of the memory service compartment; see "
Attaching the cover", Page 60.
Finishing component removal
After you have removed or changed the system components as you required, please
prepare y our device for operation again as follows:
► Install the battery again (see "
Installing a battery", Page 33).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disco nnected before.
Fujitsu 67
To Next Page
Loading...
