Connecting e xtern a l devices
Connecting an external monitor
An analogue monitor is connected to the analogue VGA monitor port, a digital
monitor to the Displayport or the DVI-D monitor port on the optional Port Replicat or.
Screen output is limited to a maximum of two screens at any one time (see "
Key
combinations", Page 24, section "Toggle out put screen").
MonitorVGAconnec tionsocketMonitorportMonitorp ort
Digital D isplaypo rt (on notebook or on optional
Port Replicator)
Analogue VGA monitor port (on notebook or on
optional port replicator)
Digital DVI-D monitor port (on the optional Port
Replicator)
► Switch off the notebook and the external monitor.
► Plug the data cab le of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external mon itor and the LCD monitor of the
notebook, see chapter "
Key combinatio ns", Page 24.
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
If you wish to operate the monitor via a DVI port, use the optional Port
Replicator available for your notebook.
Fujitsu 51
To Next Page
Loading...
