Fujitsu CELSIUS H970 - Inserting M.2 Module (Under HDD)

Removing and installing components
during servicing
Inserting the M.2 module (un der hard disk)
► Remove th e ha rd disk (HDD).
1
2
► Place the included underlying plate in the hard disk installation space (1).
► Insert the M .2 module at a slight angle in th e direction of the arro w (2),
under the hard disk installation space.
1
2
► Carefully push the M.2 module in the direction of the arrow (1).
► Fasten the M.2 module in place in the slot with the screw (2).
66 Fujitsu