Fujitsu CELSIUS H970 - Removing M.2 Module (On-Board); Inserting M.2 Module (On-Board); Settings in BIOS Setup Utility

Removing and installing components
during servicing
Removing the M.2-module (on mainboard)
2
1
► Undo the screw (1).

The M .2 module snaps slightly upwards.
► Pull the M.2 modu l
e in the direction of the a rrow (2) and out of the slot on
the mainboard an
d remove it from the casing.
Insert M.2-module (on mainboard)
1
2
► Insert the M.2 module at a slight angle in the direction of t he arrow (1)
into the slot on the mainboard.
► Fasten the M.2 module in place in the slot with the screw (2).
64 Fujitsu