Getting started
1
2
45673
1 = Security slot fo
r Security Lock
2 = Po wer connector
3 = AUDIO-IN socke
t
4 = AUDIO-OUT socket
5 = HDMI socket
6 = DVI-D socket (DVI)
7 = D-SUB socket (V
GA)
► Select
the appropriate data cable for your computer.
► Connect one of the connectors of the data cable to the D-SUB socket or the DVI-D socket or the
HDMI socket of the monitor and secure the plug connection by tightening the retaining screws.
The monitor automatically detects the input when only one signal source is connected.
► Insert one plug of the au dio line in the AUD IO IN socket on the monitor
and make sure it is properly engaged.
► Pl
ug the power cable s upplied into the power connector of the monitor.
A
lock (Security Lock) can be mounted in the security slot to protect the monitor
a
gainst theft. A Security Lock is not included w ith the monitor at delivery.
Fujitsu 17
To Next Page
Loading...
