Operation
Setting the scre en display
Open the Image setting window
Phase
Eliminate picture disturbance
With this function y o u fine-tune your monitor to eliminate picture disturbance.
Clock
Set synchroni sati on
With this function you adjust the picture width to eliminate vertical picture
disturbances.
H-Position
Adjust the horizontal position
With this function you move the picture to the left or to the right.
V-Position
Adjust the vertical position
With this function you move the picture up or down.
Sharpness
Adjust the sharpness of the picture for the Photo and Video modes.
Expansion
Adjust the picture size
Full screen = selection of full screen mode
Keep aspect = maximum picture size without distortion
Adjusting the volume
Call the Audio setting window
Vol u m e
Set the volume for playback with the integrated loudspeakers
Mute
Switch the loudspeakers off or o n
Input
Selecting th
e audio input signal (DP, PC Audio)
Setting co
lour temperature and colours
Opening the Color setting window
Select the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The
colour temperature is measured in Kelvin (K). You can choose between
6500 K, 7500 K, 9300 K, Native and Custom Color.
The options Native and Custom Color are only available in the Office setting
mode.
You can change the colour ratios of the basic colours (red, green, blue) as
required using Custom Color.Youcanuse to select the colour channels.
The 6500K setting is recommended for general Windows applications.
In the Nativ e and Custom Color settings, the full colour space of the LCD
panel can be used.
Fujitsu 27
To Next Page
Loading...
Need help?
General