Fujitsu ETERNUS DX100 S3 - Page 29

Chapter 3 Initial Setup
3.1 Initial Setup 1
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
29
4 Proceed to [Change Password].
4-1 Specify the parameters.
The main setting items are as follows.
- Old Password
- New Password
- Confirm New Password
4-2 Click the [Next >>] button.
 A confirmation screen appears.
4-3 Click the [OK] button.
 Changing of the password starts.
4-4 Click the [Done] button.
Click the [Skip] button to proceed to the next screen without setting.