Chapter 3 Initial Setup
3.1 Initial Setup 1
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
33
8 Proceed to [Setup Network Environment].
8-1 Specify the parameters.
The main setting items are as follows.
- Select Network Port
- LAN
- IPv4 Settings
- IPv6 Settings
8-2 Click the [Next >>] button.
A confirmation screen appears.
8-3 Click the [OK] button.
Setting of the network environment starts.
8-4 Click the [Finish] button.
A completed screen appears.
Set the network environment for the MNT port. If the network environment setting is not changed
from the factory default setting, some functions will not be available. Refer to "Caution" in
"Chapter 3 Initial Setup" (page 25)
and "Setup Network Environment" in "ETERNUS Web GUI User's
Guide (Settings)".
Click the [Skip] button to proceed to the next screen without setting.
To Next Page
Loading...
