Fujitsu ETERNUS DX100 S3 - Page 32

Chapter 3 Initial Setup
3.1 Initial Setup 1
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
32
7 Proceed to [Register SED Authentication Key].
7-1 Click the [Next >>] button.
 A confirmation screen appears.
7-2 Click the [OK] button.
 SED Authentication Key registration starts.
7-3 Click the [Done] button.
• If the SED Authentication Key is already registered, proceed to [Setup Network Environment].
• Click the [Skip] button to proceed to the next screen without setting.