Chapter 3 Initial Setup
3.1 Initial Setup 1
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
31
6 Proceed to [Register Advanced Copy License].
6-1 Specify the parameters.
The main setting items are as follows.
- Registration Method (only for the ETERNUS DX100 S3/DX200 S3 and the ETERNUS DX200F)
- License Key
6-2 Click the [Next >>] button.
A confirmation screen appears.
6-3 Click the [OK] button.
The Advanced Copy license registration is executed.
6-4 Click the [Done] button.
• When using ETERNUS SF AdvancedCopy Manager or ETERNUS SF Express, refer to the
documents that are supplied with ETERNUS SF AdvancedCopy Manager or ETERNUS SF Express.
• If an Advanced Copy license (trial license) is already registered, the paid license can be
registered. Input the license key.
• If the Advanced Copy license (paid license) is already registered, proceed to [Register SED
Authentication Key].
• Click the [Skip] button to proceed to the next screen without setting.
To Next Page
Loading...
