Fujitsu ETERNUS DX100 S3 - Page 62

Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning
4.4 When Using Thin Provisioning Volumes (TPVs)
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
62
5 Click the [OK] button.
 The screen returns to the previous screen. The created RAID group is displayed in the RAID group list.
6 When creating multiple RAID groups that configure a TPP, repeat Step 3 through Step 5.
7 After creating a RAID group that configures the TPP, click the [Create] button.
 A confirmation screen appears.
8 Click the [OK] button.
 Create Thin Provisioning Pool starts.
9 Click the [Done] button to return to the [Thin Provisioning Pool] screen.
End of procedure
• Specify the threshold so that "Warning" is the same or larger than "Attention".
• The "Attention" threshold can be omitted. When setting the "Attention" threshold, specify a
threshold while the checkbox is selected.