Fujitsu ETERNUS DX100 S3 - Page 71

Chapter 5 Host Interface Management
5.1 Add LUN Group
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
71
7 Check the LUN and the volume allocation information to be registered in the LUN group,
and click the [Create] button.
 A confirmation screen appears.
8 Click the [OK] button.
 Adding LUN group starts.
9 Click the [Done] button to return to the [LUN Group] screen.
End of procedure