Fujitsu ETERNUS DX100 S3 - Page 70

Chapter 5 Host Interface Management
5.1 Add LUN Group
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
70
The main setting item is as follows.
● LUN Group Setting
• Name
3 Click the [Add] button.
 The [Add LUN] screen appears.
4 Specify the LUN to start allocation volumes from, specify the number of LUNs, and select
which volume numbers are to be allocated to the corresponding LUNs.
The main setting items are as follows.
● LUN Setting
• Start Host LUNs
• Number of LUNs
• Select Volume
5 Click the [OK] button.
 Returns to the [Add LUN Group] screen.
6 Repeat Step 3 through Step 5 to set multiple allocation information between the LUNs and
the volumes.