Device Name
Copy Command via SAN Copy Command via LAN
Operation Firmware Version Operation Firmware Version
ETERNUS DX200F A All versions A All versions
(A=Available, N/A=Not Available)
*1: The acarray add command (ETERNUS Disk storage system registration command) cannot be executed with the -lan option
added.
When using the Copy command via SAN method, a logical volume that can be accessed from the Management Server is needed in
ETERNUS Disk storage system. In this manual, this logical volume is called "access volume". One logical volume of ETERNUS Disk
storage system must be assigned to Management Server as the access volume.
Figure 1.3 Example of System Configuration Using Copy Command via SAN
When using the Copy command via LAN method, no access volume is needed.
- 4 -
To Next Page
Loading...
