Fujitsu ETERNUS DX60 S2 - Set System to Maintenance Mode

Chapter 2 Components
2.3 Power Distribution Units (For Regions other than EMEA&I)
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User’s Guide -Installation-
43
Copyright 2014 FUJITSU LIMITED P3AM-5502-05ENZ0
2.3 Power Distribution Units (For Regions other than
EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
2.3.1 Power Distribution Units (1U)
The 1U power distribution unit has four outlets and two inlets.
■ Power Distribution Units (1U)
Figure 2.25 Power distribution unit (1U)
● Part explanation
• Main line switch
This turns on and off the power distribution unit.
• Inlet (INPUT)
This is a socket (IEC60320-C13) for incoming power supply. This socket is used to connect a
power cord (AC input cable).
• Outlet (OUTPUT)
This is a socket (IEC60320-C13) for outgoing power supply. This socket is used to connect a
power cord (AC output cable).
Inlets (INPUT)
Outlets (OUTPUT)
Main line switches