Fujitsu fi-5220C User Manual

8.1BasicSpecifications
*4 The scanning speed is the maximum speed of the scanner hardware. Software processing time such as data
transfer time is added to the actual scanning time.
*5 The scanning speed noted is the value when using the ADF to scan.
*6 The maximum stacking capacity varies according to the document thickness. For details, see "
Chapter7 ADF AND
PAPER SPECIFICATION".
*7 The Ultra SCSI and USB 2.0 / 1.1 interfaces cannot be used at the same time.
*8 If you connect the scanner with USB 2.0, it is required that the USB port and the Hub are compliant with USB 2.0.
The scanning speed may slow down when you connect the scanner with USB 1.1. If your omputer has the
compatible USB 2.0 port, please use it.
AllRightsReservedCopyright2006©PFULIMITED
file://///Hd-htgle21/Manual/fi-5120C5220C-lynx2/OG/R03/contents/EN/08/c080101.htm(2/2)2006/08/2916:02:07

Fujitsu fi-5220C Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	24 bit
Maximum scan size	210 x 297 mm
Optical scanning resolution	600 x 600 DPI
Flatbed scan speed (b/w, A4)	2 sec/page
Scanner type	Flatbed & ADF scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	SCSI, USB 2.0
Bundled software	-FJ TWAIN driver. -Scandall. -Adobe Acrobat. -ISIS Driver. -QuickScan (demo). -Soft IPC (demo). -VRS 4.1 Basic.
Dimensions (WxDxH)	302 x 569 x 229 mm
Power requirements	100-240 VAC
Power consumption (standby)	6 W
Power consumption (typical)	34 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Weight	8400 g