Fujitsu fi-5220C - Page 25

2.1TurningtheScannerON(5)
fi-5120C / fi-5220C Image Scanner Operator Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP

2.1TurningtheScannerON(5)


1 2 3 4
5
6
3) Click "Device Set" tab.
The following screen is displayed.
2. Click [Power Control] button
The following screen is displayed.
3. Select a power ON/OFF control
● To power on/off the scanner by pressing the Power button:
select "Enable power switch".
● To power on/off the scanner by connecting/disconnecting the AC cable:
select "Disable power switch".
file://///Hd-htgle21/Manual/fi-5120C5220C-lynx2/OG/R03/contents/EN/02/c020105.htm(1/2)2006/08/2915:59:50