2.14 Scanning by Pressing the Scan Button on the Scanner
fi-5530C2 Image Scanner Operator’s Guide 85
SCANNING VARIOUS TYPES OF DOCUMENTS
2
6. Select [ScandAll PRO] as the application to launch when an event occurs.
In Windows XP, select an application from the [Start this program] drop-down list under
[Actions].
7. Click the [OK] button.
8. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] D [Fujitsu ScandAll PRO] D [Fujitsu
ScandAll PRO], and then ScandAll PRO starts up.
9. From the [Tool] menu, select [Preferences].
⇒ The [Setup] dialog box appears.
10. Select the [Event] tab.
HINT
To link another button, perform steps 5 to 7 again.
To Next Page
Loading...
