3.2 Cleaning the ADF
fi-5530C2 Image Scanner Operator’s Guide 91
DAILY CARE
3
2. Clean the following locations with a lint-free cloth moistened with Cleaner F1.
ATTENTION
It may take long before the cleaner vaporizes if a large quantity is used.
When cleaning the scanner parts, dampen a cloth with modest quantities
of the cleaner. In addition, wipe off the cleaner completely with a soft lint-
free cloth to leave no residue on the surface of the cleaned parts.
Feed rollers
Sheet guide
Pick rolles
Ultra sonic
sensors (x2)
Plastic rollers (x4)
Glasses (x2)
Eject rollers
Pad ASSY
To Next Page
Loading...
