1.5 How to Use ScandAll PRO
fi-5530C2 Image Scanner Operator’s Guide 33
BASIC SCANNER OPERATIONS
1
■ Scan
1) Place the document on the scanner.
For information about how to place documents, refer to section "1.2 Placing
Documents on the ADF" on page 6.
2) From the [Scan] menu, select [Scan Settings].
Or, select the [Scan Settings] button ( ) on the toolbar.
⇒ The [Scan Settings] dialog box appears.
3) In the [Scan Settings] dialog box, configure various settings for saving scanned document
images.
[Save to file] Checkbox
To save scanned document images immediately after scanning, mark this checkbox.
If you want to verify scans before saving them to file, clear this checkbox.
To Next Page
Loading...
