38
•To change the settings of an existing profile:
Select a profile you want to change settings for, and click the [Edit] button.
⇒ The selected profile appears in the [Profile Editor] dialog box.
(Go to step 3.)
•To delete an existing profile from the profile list.
Select a profile you want to delete, and then click the [Delete] button. When you see a
confirmation message, click the [Yes] button.
⇒ The selected profile is deleted.
3. In the [Profile Editor] dialog box, configure settings for scanning and saving scanned
document images.
[General] Tab
You can type in a profile name and description, and select a profile type.
[Scan] Tab
You can configure settings for a scanner to use.
Clicking the [Detail Scanner Settings] button displays the setup dialog box of the
scanner driver.
[File format and Name scheme] Tab
You can specify various parameters for saving scanned document images.
HINT
If the [Type] of a profile in the profile list is [Template], it is a sample profile.
It cannot be used for scanning documents. Use sample profiles as the
basis for you to create new profiles.
To Next Page
Loading...
