52
\
ATTENTION
Notes on the use of Adobe Acrobat
• Acrobat's default settings overrides the previous settings such as
[Resolution], [Scan Type], and [Image Mode].
• The following functions cannot be used:
- [256 Color] or [8 Color]
- [Rotation Degree] when [End of Page Detection] is selected
- Long Page Scanning
• When scanning a paper document and converting the scanned document
image to PDF by using Acrobat, unexpected images may be output
when:
1. Setting [Edge Shadow Removal] in Acrobat, and setting [Digital
Endorser] or [Black Background] options in the TWAIN driver at the
same time. Character strings on images or part of background may
be missed.
Solution 1: In Acrobat, select [File] - [Create PDF] - [From
Scanner...] - [Image Settings...], and set [Edge shadow removal] to
[OFF] or set [Color/Grayscale] and/or [Monochrome] under
[Compression] to a setting other than [Adaptive].
Solution 2: Adjust the scanning density in the TWAIN driver.
2. Setting [Color/Grayscale] and/or [Monochrome] to [Adaptive] under
[Compression] in Acrobat and scanning documents in a resolution
lower than the recommended resolution for Acrobat.
Solution: Set [Color/Grayscale] and/or [Monochrome] to a setting
other than [Adaptive] under [Compression].
3. Setting [Overscan] in the TWAIN driver because a document longer
than the double letter (11x17) or A3 size cannot be loaded in
Acrobat.
Solution: When scanning a double letter (11x17) or A3 size
document, do not set [Overscan] in TWAIN driver.
For more information on Acrobat, including the use of Acrobat, refer to
"Create a PDF file from a scanned document" in Acrobat Help.
To Next Page
Loading...
