78
⇒ The [Multi Image] dialog box appears.
3. Select [Auto Color Detection] under [Output mode].
4. Under [Select Current Image Setting], select a side, and then configure settings for
each side in the [TWAIN Driver] dialog box.
5. In the [TWAIN Driver] dialog box, click the [OK] button.
⇒ Changes made are saved and the [TWAIN Driver] dialog box closes.
Continue scanning in ScandAll PRO.
For information about how to scan documents, refer to section "1.5 How to Use ScandAll
PRO" on page 29.
ATTENTION
When scanning in duplex mode, the same [Image Mode] must be selected
for both the front and back sides.
To Next Page
Loading...
