Fujitsu fi-6400 User Manual

Index
Introduction
Chapter 7 Troubleshooting
Appendix
Glossary
Contents
TOP
127
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Operational
Settings
Replacing
Consumables
Scanner
Overview
Troubleshooting
A shadow appears on the leading edge of the
scanned image.
Have you adjusted the offset (starting position for
scanning)?
No
In [Device Setting] of the Software Operation Panel, adjust the offset in the sub-
scanning direction.
For more details, refer to "Adjusting the Starting Position for Scanning [Offset/
Vertical Magnification Adjustment]" (page 149).
Ye s
Did you use the filtering function?
No
In [Device Setting 2] of the Software Operation Panel, use the filtering function to
fill out the shadow that appeared on the edge of the document.
For more details, refer to "Eliminating Shadows or Streaks on the Scanned Image
Edge [Page Edge Filler (ADF)]" (page 151).
Ye s
If the above countermeasures do not solve the problem, check the items in "7.4
Before You Contact the Scanner Service Provider" (page 128) first, then contact
your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.

Fujitsu fi-6400 Specifications

General

Optical Resolution	600 dpi
Duplex Scanning	Yes
Connectivity	USB 2.0
Paper Size	A4, A5, A6, Letter, Legal
Interface	USB 2.0
Output Resolution	600 dpi
Scanning Method	Contact Image Sensor (CIS)
Color Depth	24-bit color
Paper Handling	Automatic Document Feeder (ADF)
Operating System Compatibility	Windows, Mac