Index
Chapter 6 Replacing Consumables
Appendix
Glossary
Introduction
Contents
TOP
97
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Replacing
Consumables
1 Remove all documents from the stacker.
2 Open the ADF.
For information on how to open the ADF, refer to "1.5 Opening/
Closing the ADF" (page 19).
3 Remove the separator roller from the scanner.
1 Open the roller cover. Grab the tabs on the left and right with your
fingers and pull down the cover towards you.
2 Pull down the lever which is located on the right-hand side of the
separator roller.
3 Pull down the lever which is located on the left-hand side of the
separator roller.
6.3 Replacing the Separator Roller
Be careful not to have your fingers caught
when the ADF closes.
To Next Page
Loading...
