Getting started English - 9
Settingupthedevice
In order to ensure that the casing is sufficiently ventilated and to prevent overheating,
the device must only be operated with the base foot attached.
If the device is to be built-in, adequate ve ntilation must be assured.
Fit the base feet for horizo
ntal or vertical operation (see "
Vertical op erating position ",
Page 9 - English and "Horiz
ontal operating p osition", Page 10 - Engl ish).
Base feet for horizontal
operation are available as an option .
Vertical operating pos
ition
VerticaloperatingpositionOperating position,verticalBasefeetSid ecover
Use th e supplied foo t when the device is to b e used in a vertical po sition.
Proceed as follows to operate the device in the vertical operating position:
► Disconnect the cables if required.
► Push the device onto the foot in the direction of the arrow.
► If necessary, reconnect any cables that were previously disconnected.
Fujitsu Technology Solutions 51
To Next Page
Loading...
