System expansio ns English - 33
Installing and removing a Power
over Ethernet
module (optional)
You can install an additional P
ower over Ethernet module in your device.
Alternatively, you can insta
ll a W LAN mod ule in the same slot. You
can only install one of the mo
dules.
If you are supplying the sy
stem with power via the PoE module, ensure that
no additional power suppl
y (mains adapter) is connected.
Not all expansion levels
support this mo dule: Please ob serve the information provided
by the manufacturer when
installing the Power over Ethernet module.
Installing the Power over Ethernet module
Powerover Ethernetmo dule,
► Open the casing (see "Opening the casing", Page 20 - English).
► If a PCI or PCIe board is installed, remove the cross piece and PCI or PCIe
board (see "
Removing the board", Page 38 - English).
1
2
► Break the cover (1) out of the casing.
Fujitsu Technology Solutions 75
To Next Page
Loading...
