36 - English System expansions
Installing and removing the PCI or PCIe board
You can install either a PCI or a PCIe board (e.g. display adapter) in your device.
The installation and removal procedure is the same for both types of board.
The illustration below shows a PCIe board.
Installing the board
Board,
You can only install boards with a maximum length of 170 mm.
► Enter the required settings for the board.
► Open the casing (see "
Opening the casing", Page 20 - English).
1
2
► In sert the riser card in its slot (1).
► Undo the screw (1) and remove the rear slot cover plate of the slot (2).
78 Fujitsu Technology Solutions
To Next Page
Loading...
