38 - English System expansions
Removing the board
Board,
► Open the casing (see "O pening the casi ng", Pag e 20 - English).
2
1
► Loosen the screw (1).
► Remove the board from the riser card (2).
You m ust reinstall the rear slot cover plate due t o cooling, fire protection a nd the EMC
regulations (regulations on electromagnetic compatibility) to be complied with.
► Reinstall the rear slot cover plate by inserting it in the inst allation slot from
the inside and securing it with the screw.
► Close the casing (see "
Closing the c asing", Page 21 - Engl ish).
80 Fujitsu Technology Solutions
To Next Page
Loading...
