28 - English System expansions
Removing the loudspeaker
Loudspeaker
► Open the housing (see "O pening the casing", Page 20 - En glish).
► If a PCI or PCIe bo ard is installed, remove t he cross piece and PCI or PCIe
board (see "
Removing the board", Page 38 - English).
2
2
1
► Disconnect the loudspeaker cable from t he mainboard (1).
► Undo the screws (2).
► Lift the loudspeaker out of the housing.
► R einstall the cross piece and the PCI or PCIe board if necessary (see
"
Install ing th e board", Page 36 - English).
► Close the housing (see "
Closing the casing", Page 21 - English).
70 Fujitsu Technology Solutions