32 - English System expansions
2
2
3
1
► Disconnect the cable of the WLAN module from the mainboard (1).
► Undo the screws (2).
► Pull the WLAN module in the direction of the arrow ( 3) out of the slot and lift it out of the casing.
► R einstall the cross piece and the PCI or PCIe board if necessary (see
"
Install ing th e board", Page 36 - English).
► Close the casing (see "
Closing the c asing", Page 21 - Engl ish).
Ensure that cables are not trapped between the casing and the components.
74 Fujitsu Technology Solutions
To Next Page
Loading...
