Working with the notebook
Inserting battery
► Position the battery at th e edge.
► Push the battery into the battery compartment until you feel it engage.
► Complete the removal, see chapte r "
Finishing component remov al", Page 61.
Optical drive
Opticaldrive
This product contains a light emitting diode, classified in accordance w ith IEC
8251:1993: LASER CLASS 1, and must therefore not be opened.
Handling data carriers
Handling
Observe the followi
ng guidelines when handling data carriers:
• Avoid touching the su
rface of a da ta carrier. O nly handle data carriers by their edges.
• Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
• Protect your data ca
rriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data c arrier in areas subject to high temperatures or humidity.
You may use both 8-cm a
nd 12-cm data carriers in the optical drive.
When using a data carri
er of lesser quality, vibrations and reading errors may occur.
32 Fujitsu Technology Solutions
To Next Page
Loading...
