Connecting external devices
Connecting U SB devices
USBports
On the USB ports, you can connect external devices that a lso have a USB po rt
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect
devices w hile your operating system is running.
USB 1.x ha s a maximum data transfer rate of 12 Mbit/s.
USB 2.x has a data transfer rate of up to 480 Mbit/s.
Additional information can b
e found in t he documentation for the USB devices.
► Connect the da ta cable to the
external device.
► Connect the data cable to a USB
port of the notebook.
Device drivers
USB devices will be automatically recognised and installed by your operating system.
How to remove USB devi
ces correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Le ft click on the icon to safely remove hardware, located in the taskbar.
► Select the device which you want to shut down and remove.
► Press the Enter key.
Wa it for the dialogue box which tells you that it is now safe to remove the device .
50 Fujitsu Technology Solutions
To Next Page
Loading...
