Removing and installing components
during servicing
Installing the optical drive
2
2
1
► Slidethedriveint
o the notebook (1).
► Fasten the screw s (2).
► Complete the remov
al, see "
Finishing component removal", Page 61.
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see "
Inserting battery", Page 32).
► Turn the notebook t
he right way up again and place it on a flat surface .
► Reconnect the cables that you disconnected before.
Fujitsu Technology Solutions 61
To Next Page
Loading...
