Working with the notebook
Removing the c ard
Always remove the card accord ing to the rules described below, to
ensure that none of your d ata is lost.
You can stop the Expre ssCard using th e corresp onding symbol in the task bar:
► Click on the symbol for safe removal of hardware with the left mouse button.
► Select the ExpressCard you wan
ttostopandremove.
► Press th e Enter k ey.
Wait for the dialogue box w hich t
ells you that it is now safe to remove the ExpressCard.
1
2
► Press the edge of the card (1) so that the
card protrudes a little from the notebook.
► Pull the card out of the slot (2).
2
► Insert the card placeho
lder into the
slot guide.
► Gently slide the card placeholder into the
slot until you feel it click into place.
Loudspeakers and microphones
MicrophoneLoudspeakersBassloudspeak er(subwoo fer)Volume con trol
Information on the exa ct position of the speakers and microphone can be
found in "
Ports and controls " , Page 9.
Please refer to chapter "
Key combin ations", Page 2 4 for information on setting the v olume
and also enabling/disabling the loudspeakers using key combinations.
If you attach an external microphone, the built-in microphone is disabled.
When you connect headphones or external speakers, the built-in spe akers are disabled.
Information on connecting headphones and a microphone can be found
in "
Connecting external devices", Page 47.
Fujitsu Technology Solutions 39
To Next Page
Loading...
