Connecting external devices
Connecting external devices
Always refer to the safet y information provided in "Important notes", Page 12 before
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to conn ect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the steps below in order, when connecting or disconnect ing
devices to your notebook:
With some devices such as USB devices, it i s n ot necessary to switch off
the notebook and the device befo re connect ing/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and exte rnal device documentation).
Connecting d evices to the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and a l
l devices from the m ains sockets.
3. Connect the cables for your external devices following the instructions.
4. Plug all power cables into t
he mains sockets.
DevicesPer ipheralde
vices
Disconnecting de v ices from the noteb oo k
1. Turn off your notebook and all external devices.
2. Unplug your notebook and a ll dev
ices from the mains sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPer ipheraldevices
Fujitsu Technology Solutions 47
To Next Page
Loading...
