Removing and installing components
during servicing
Attaching the c over
2
1
► Place the cover in t
he correct m ou nting position (1).
If you r emove more
than one component at the same time, keep the screws for the
individual comp
onents separately from each other and make sure that you use the
correct screws.
If you install the wrong screws, components may be damaged.
► Tighten the screw (2).
► Insert the batter
y (see C hapter "
Inserting battery", Page 32).
Fujitsu Technology Solutions 59
To Next Page
Loading...
