First-time setup of your d evice
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 12.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltage
using the mains adapter, see "
Mains adapter co nnecting", Page 16 .Themains
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The b attery must be charged if you want to operate your device using the battery.
When used on the m ove, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. m ouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and c
hecking the device
Should you discover any damage that o ccurred during transportation,
notify y our local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your d
evice for any visible dam age which may have occurred during tra nsportation.
You may nee
d the packaging in the future, if you need to transport your device.
Fujitsu 15
To Next Page
Loading...
