Connecting extern a l devices
USB port with charging function (Anytime USB charge)
USBchargingfunction
It is recommended that the note book be operated with the power supply connected
whenever the USB port with charging function is in use, as this function w ill drain
the battery more quickly if an external USB device is being charged.
The power supply unit must already be connected when the notebook is
switched off, as otherwise the USB charging function will be disabled and
the connected USB device s will not be charged.
Some USB devices (e.g. mobile telephones) require a driver in order to utilise the
USB c harging function. In this case the USB charging function will not work when the
notebook is switched off, as no drivers are active when the notebook is switched off.
You can use this
USB port to charge or su pply power to a USB device (e.g. to charge a PDA
or a mobile phon
e or to connect a USB lam p), even if the n otebook is switched off.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Le ft click on the icon to sa fely remove hardware, located in the taskbar.
► Select the device which you want to shut down and remove.
► Press the Enter key.
Wait for the dialogue box which tells you that it is now safe to remove the device .
42 Fujitsu
To Next Page
Loading...
