First-time setup of your d evice
Switching on the device for the first time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied software is
installed and configured. Because this proced ure must not b e interrupted,
you should set aside enough time for it to be fully comp leted and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use yo
ur device for the first time , the operating system
is pre-installed on the
hard disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a Window s operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc.
on the device or on the Internet at "
http://www.fujitsu.com/fts/support/".
You can find information a nd help on the Windows operating system functions
on the Internet at "
http://windows.microsoft.com".
Fujitsu 17
To Next Page
Loading...
