Importan t notes
Important notes
ImportantnotesNotes
This chapter contains essential safety information which must be followed
when working with you r noteb ook. Other note s also provide useful information
which will help you with your notebook.
Safety notes
SafetynotesNotes
Please follow the safety notes provided in the "Safety/Regulations" m anua l
as well as the safe ty n otes given below.
Please pay special attention t o the sections in the man ual m arked
with the sym bol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this op erating manual.
Read the information on the ambient conditions in the "
Technical data",
Pag e 68 and "First-time setup of your device", Page 15 before preparing your
notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "
Cleaning the notebook", Page 14.
Pay attention to the additional safety notes for devices with radio c ompo nents
provided in the "Safety/Regulations" manua l.
Please refer to the notes in the chapter "
Removing and installing
comp onents during s ervicin g", Page 49.
This notebook
complies with the relevant safety regulations for d ata processing
equipment. I
f y ou have questions about using your notebook in a particular area,
please conta
ct your sales outlet or our Ho tline/Service Desk.
Additional safety notes for devices with
radio components
Radiocom pon ent:WirelessLAN:Bluetooth,safetynotes
If a radio c omponent (Wireless LAN, B luetoot h, UMTS) is integrated in you r notebook, you
must be sure to observe the following safety notes when using your notebook:
• Switch off the radio components when you are in an aircraft or driving in a car.
• Switch off the radio components when you are in a hospital, an operating room or near a m edical
electronics system. The transmitted radio waves can impair the operation of medical device s.
• Switch off the radio components when you let the device ge t near flammable
gases or into hazardous environments (e.g . petrol station, paintshops), as the
transmitted rad io waves can cause a n explosion or a fire.
For information on how to sw itch radio components on and off, see c hapter
"
Switch ing the wire less components on and off", Page 38.
12 Fujitsu
To Next Page
Loading...
