First-time setup of your device
Selecting a location
SelectingalocationDeviceMainsad apter
Select a suitable location for the device be fore setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft s urface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device he ats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please n ote that the
rubber feet of the device ma y mark certain types of delicate surfaces.
• Keep other objects at least 100 mm aw ay from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots o f the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingf or operationMainsadapt er
Observe the safety notes in the enclosed "Safety/Regulations" m an ual.
The supplied power cable conforms to the requirements of the country in
which y ou purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
1
2
► Connect the power cable (1) to the
mains ada pter.
► Plug the mains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) to
the DC jack (DC IN) of the de vice.
16 Fujitsu
To Next Page
Loading...
