Removing and installing compo nents
during servicing
Installing the optical drive
2
1
► Slide the drive
into the notebook (1).
► Tighten t he screw (2).
► Complete the r
emoval, see "
Finishing component removal", Page 58.
Finishing component removal
After you have removed or cha nged t he system components as you required, please
prepare your device for operation again as follows:
► Install the battery again ( see "
Inserting battery", Page 31).
► Turn the n
otebook the right way up ag ain a nd place it on a flat surface.
► Reconnect th e cables that you disconnected before.
58 Fujitsu
To Next Page
Loading...
