Working with the notebook
Inserting battery
► Position the battery at the edge.
► Place the battery into the battery compartment until you feel it engage.
► Complete the removal, see chapter "
Finishing componen t removal", Pa ge 58.
Optical drive
Opticaldrive
This product contains a light emitting diode, classification according to IEC 60825
1:2007: LASER CLASS 1, and must the refore not be opened.
Handling data carriers
Handling
Observe the following guidelines when handling data carriers:
• Avoid tou ching the surface of a data carrier. On ly handle data carriers by their edges.
• Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
• Protect your data carriers against dust, m echanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high tempe ratures or humidity.
You may use both 8-cm and 12-cm data carriers in the optical drive.
When using a data carrier of lesser quality, vibrations and reading erro rs may occur.
Fujitsu 31
To Next Page
Loading...
