Troublesho ot ing and tips
The notebook stops w orking
NotebookEnergysavi ngmode
Cause Troub leshooting
Notebook is in energy saving mo
de.
► Leave energy saving mode.
An application programme has
caused the
malfunction.
► Close th e application program or restart
the notebook (by restarting the operating
system or sw itching the device off and back
on again).
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapt
er to the
notebook.
The printer does not print
Printerdoe s notp
rint
Cause Troub leshooting
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation s upplied with the printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or n ot correctly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whethe
r the correct printer driver is
loaded (ref
er to the printer documentation).
The radio connection to a network does not work
Theradi
oconnect i ontoa network doesnot w ork
Cause Troub leshooting
The wireless c ompo nent is disabled.
► Switch the radio component on (see
"
Switch ing the wirel ess components on and
off", P age 38).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
► Check whether th e radio c onnection is
switched on via the software.
► Furthe
r information on using the radio
compo
nent can be found in the help files.
Fujitsu 65
To Next Page
Loading...
